UTS quartz movement
Dimensions: 55.8 x 55.8 x 17 mm
Used with LR6 battery (not included)
Complete with accessories
Barrel diameter (shaft or rod): Ø Minute = 3.50 mm Ø Hour = 5.00 mm
No compatible hands for sale on our site with this TYPE B movement. However, you can adapt the hands (see below)
Hand information (not included with the movement):
Hands axis diameter

dimensions Minute: Ø3.50 mm TYPE A - EURO Hands - adaptation by filing the flats of the hands axis
Hour: Ø5.50 mm NEF - TYPE B Ø5.50 mm hands must be pinched to adapt Second "second hand": Ø 0.75 mm

UTS quartz movement
Dimensions: 57 x 57 x 17 mm
Used with LR6 battery (not included)
Can take minute hands up to 400mm long, weighing up to 20 grams
    Can take centre seconds hands up to 125mm long, weighing up to 1.2 grams

Complete with accessories
 

Barrel diameter (shaft or rod): Ø Minute = 3.50 mm Ø Hour = 5.50 mm
No compatible hands for sale on our site with this TYPE B movement. However, you can adapt the hands (see below)
Hand information (not included with the movement):
Hands axis diameter

dimensions Minute: Ø3.50 mm TYPE A - EURO Hands - adaptation by filing the flats of the hands axis
Hour: Ø5.50 mm NEF - TYPE B Ø5.50 mm hands must be pinched to adapt Second "second hand": Ø 0.75 mm

Pendulum Quartz UTS Movement

• Euroshaft
• Battery:(LR6)
• Can take minute hands up to 160mm long
• Can take centre seconds hands up to 90mm long

Dimensions:

• Shaft = From movement front to shaft tip

Non Euro Fitting (NEF) Hand Collet Dimensions:

• Minute: Ø3.50mm
• Hour: Ø5.00mm

UTS quartz movement
Used with LR6 battery (not included)
Complete with accessories 10.5 mm barrel for 1 to 3 mm support
nut 5.2 mm
Dimensions: 56 x 108 x 26 mm
Barrel diameter (shaft or rod):
Ø Minute = 3.50 mm Ø Hour = 5.50 mm

No compatible hands for sale on our site with this TYPE B movement. However, you can adapt the hands (see below)
Hand information (not included with the movement):
Hands axis diameter

dimensions Minute: Ø3.50 mm TYPE A - EURO Hands - adaptation by filing the flats of the hands axis
Hour: Ø5.50 mm NEF - TYPE B Ø5.50 mm hands must be pinched to adapt Second "second hand": Ø 0.75 mm

Radio Controlled & Hi Torque, UTS

• Radio controlled
• Non Euroshaft movement
• Battery: MN1400 (LR14)
• Can take minute hands up to 230 mm long
• Can take centre seconds hands up to 200 mm long
• Signal originates from Germany (see additional image for coverage area)
• When assembling set hands at 11 o'clock

Dimensions:

• 90 x 65 x 25mm
• Shaft = From movement front to shaft tip

Hand Collet Dimensions:

   Seconde : Ø 0.75 mm
   Minute: Ø3.50mm
   Hour: Ø5.00mm

Possible causes of interference:

• Domestic appliances
• TV receivers closer than 2 metres
• Machinery with HF leakage
• Signal may be affected by mountainous or hilly terrain or adverse meteorological conditions

Troubleshooting:

• Check correct polarity of battery
• Ensure the clock is at least 6 feet away from a TV, computer, air conditioner or any other electrical household appliances. Optimal location is near a window
• Remove battery and start again
• There may be an interruption at the transmitter. Wait a few hours and try again
• Due to the signal requirements of these movements it is important that a fresh, fully charged alkaline battery is used initially and then changed on a regular basis as a partially charged battery may not be strong enough to receive the radio signal, resulting in the movement not fully functioning correctly

Pendulum Quartz UTS Movement

• Radio controlled
• Euroshaft
• Battery: MN1500 (LR6)
• Can take minute hands up to 120mm long
• Can take centre seconds hands up to 90mm long
• Signal originates from Germany (see additional image for coverage area)
• When assembling set hands at 11 o'clock

Dimensions:

• 75mm x 108mm
• Shaft = From movement front to shaft tip

Non Euro Fitting (NEF) Hand Collet Dimensions:

• Minute: Ø3.50mm
• Hour: Ø5.00mm

Possible causes of interference:

• Domestic appliances
• TV receivers closer than 2 metres
• Machinery with HF leakage
• Signal may be affected by mountainous or hilly terrain or adverse meteorological conditions

Troubleshooting:

• Check correct polarity of battery
• Ensure the clock is at least 6 feet away from a TV, computer, air conditioner or any other electrical household appliances. Optimal location is near a window
• Remove battery and start again
• There may be an interruption at the transmitter. Wait a few hours and try again
• Due to the signal requirements of these movements it is important that a fresh, fully charged alkaline battery is used initially and then changed on a regular basis as a partially charged battery may not be strong enough to receive the radio signal, resulting in the movement not fully functioning correctly

Minute Hand Nuts for quartz movement
Ø6.00 x 1.60mm (diameter x thickness)

Movement Quartz Insertion 103 mm Roman Numerals

Dimensions (outer bezel diameter x insert diameter):
Ø 103 mm x Ø 56 mm

Speaker bracket for strike and chime movements hermle
Material: Black plastic